New V6 won't power on or connect

tcash21

New member
Hello,

I'm very excited to try out the V6 Fifish but I can't even get it to turn on. It seemed to power on the first time I plugged it all in (heard the 7 chimes when turning on the controller, then the 5 chimes when connecting to the ROV).

I connected to the Fifish wifi but the screen in the iOS app said 'Disconnected'.

Decided to try to fully charge the ROV and controller overnight. The controller seemed to charge fine (solid white light) but the AC adapter for the ROV blinks red/green. It does not appear solid green or red when I connect the charger to the drone, just blinks mostly red.

So now I can't get a connection to the drone and of course the app still says 'disconnected.'
I also tried updating the firmware (download it via the app while connected to internet, then connect to the Fifish wifi and follow the instructions, but it says network error).

Please help! Really wanted to take it out this weekend.
 

m00ds

New member
I have the same situation. The new drone swam for only an hour and then shut down. I pulled through and missed the warranty as it was hard and painful to send out.
Today I disassembled the drone (a real quest), and yes, the hole is scorched on the motherboard.
Found a new motherboard only in the US, thinking to order one.
 

Attachments

  • 20230112_094213_copy_1000x750.jpg
    20230112_094213_copy_1000x750.jpg
    303.5 KB · Views: 221
  • 20230112_100655_copy_750x1000.jpg
    20230112_100655_copy_750x1000.jpg
    264.6 KB · Views: 222
  • 20230112_100711_copy_1000x750.jpg
    20230112_100711_copy_1000x750.jpg
    273.3 KB · Views: 223
  • 20230112_094206_copy_1000x750.jpg
    20230112_094206_copy_1000x750.jpg
    227.6 KB · Views: 218

Wamoz

New member
I had a similar problem ... discovered that I wasn't pushing the controller-to-ROV lead into the jack on the back of the controller properly. It takes a firm push for it to click in properly.
 

Evgenii

New member
I have the same situation. The new drone swam for only an hour and then shut down. I pulled through and missed the warranty as it was hard and painful to send out.
Today I disassembled the drone (a real quest), and yes, the hole is scorched on the motherboard.
Found a new motherboard only in the US, thinking to order one.
Have you bought a new board?
Do you have more pics inside fifish v6? (foto battery and other).
 
Last edited:

m00ds

New member
Have you bought a new board?
Do you have more pics inside fifish v6? (foto battery and other).
I bougth a new board and got it in may only. Because it's available in US only and they don't ship it abroad. It works now with two limitations:
- there is no temperature and depth overlay on videos. But you can see them in the app.
- I can't download big files from the drone, i.e. 3GB and more
 

Evgenii

New member
I bougth a new board and got it in may only. Because it's available in US only and they don't ship it abroad. It works now with two limitations:
- there is no temperature and depth overlay on videos. But you can see them in the app.
- I can't download big files from the drone, i.e. 3GB
 

m00ds

New member
There were different models ranging from $250 to $500. I bought one for $250 and must have created a rush, because after that the cheapest one went for $500
 

liber

New member
Buenas me pasa lo mismo .. me conecto a la emisora vía WiFi.. pero el rov no conecta no enciende..la emisora todo el rato giro de luces . Y el cable está bien
 
Top